Command Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510
Chapter 7 MSDP Configuration Commands
7.1 MSDP Configuration Commands
7.1.1 cache-sa-enable
Syntax
cache-sa-enable
undo cache-sa-enable
View
MSDP view
Parameter
None
Description
Use the cache-sa-enable command to enable the SA message cache mechanism.
Use the undo cache-sa-enable command to disable the cache mechanism.
By default, a router caches (S, G) entries after it receives an SA message.
If the router is in the cache state, it sends no SA request message to the specified
MSDP peer when it receives a Join message.
Example
# Enable the router to cache all SA states.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] msdp
[H3C-msdp] cache-sa-enable
7.1.2 display msdp brief
Syntax
display msdp brief
View
Any view
Chapter 7 MSDP Configuration Commands
7-1