Display Ospf Brief - H3C s3600 series Command Manual

The Count of Route is 0
Table 4-2 Description on the fields of the display ospf asbr-summary command.
Field
net
mask
tag
status

display ospf brief

Syntax
display ospf [ process-id ] brief
View
Any view
Parameters
process-id: OSPF process ID, in the range of 1 to 65535. If you do not specify a process ID, this
command applies to all current OSPF processes.
Description
Use the display ospf brief command to display brief OSPF information.
Examples
# Display brief OSPF information.
<Sysname> display ospf brief
RouterID: 7.7.7.7
Spf-schedule-interval: 5
Routing preference: Inter/Intra: 10 External: 150
Default ASE parameters: Metric: 1 Tag: 1 Type: 2
SPF computation count: 30
Area Count: 2
Area 0.0.0.0:
Authtype: none
SPF scheduled: <>
Interface: 192.168.0.39 (Vlan-interface1)
Cost: 10 State: DROther
Network address of the summary route
Subnet mask of the summary route
Tag of the summary route
Advertisement state of the summary route, including
DoNotAdvertise: The summary can not be advertised.
Advertise: The summary can be advertised.
OSPF Process 1 with Router ID 7.7.7.7
OSPF Protocol Information
Border Router: Nssa Area AS
Nssa Area Count: 1
Flags: <>
Type: Broadcast
Description
4-10