Selective Qinq Configuration Commands - H3C S3100 Series Command Manual

2

Selective QinQ Configuration Commands

This chapter is only applicable to S3100-EI series switches.
Selective QinQ Configuration Commands
raw-vlan-id inbound
Syntax
raw-vlan-id inbound vlan-id-list
undo raw-vlan-id inbound { all | vlan-id-list }
View
QinQ view
Parameters
vlan-id-list: Lists of VLAN IDs. After receiving packets of these VLANs, the switch will encapsulate the
packets with the specified outer VLAN tag. You need to provide this argument in the form of { vlan-id [ to
vlan-id ] }&<1-10>, where the VLAN ID after the to keyword must be larger than or equal to the VLAN ID
before the to keyword and &<1-10> means that you can specify up to 10 VLANs/VLAN ranges for this
argument.
all: Removes all configurations of encapsulating an outer VLAN tag for specified inner VLANs in the
current view.
Description
Use the raw-vlan-id inbound command to specify to encapsulate packets with the specified inner
VLAN tags with the specified outer tag. This command must be configured on ports connecting the user
network.
Use the undo raw-vlan-id inbound command to remove the configuration.
By default, the switch does not encapsulate packets with any outer VLAN tag.
2-1