Ppp Mp Lfi Delay-Per-Frag; Ppp Mp Lfi Enable - H3C MSR810 Command Reference Manual

[Sysname-MP-group2/0/0] ppp mp fragment disable
Related commands

ppp mp lfi enable

ppp mp min-fragment

ppp mp lfi delay-per-frag

Use ppp mp lfi delay-per-frag to set the maximum LFI fragment transmission delay on an interface.
Use undo ppp mp lfi delay-per-frag to restore the default.
Syntax
ppp mp lfi delay-per-frag time
undo ppp mp lfi delay-per-frag
Default
The maximum LFI fragment transmission delay is 10 ms on an interface.
Views
VT interface view
Dialer interface view
MP-group interface view
Predefined user roles
network-admin
Parameters
time: Specifies the maximum LFI fragment transmission delay, in the range of 1 to 1000 ms.
Examples
# Set the maximum LFI fragment transmission delay to 20 ms on MP-group 2/0/0.
<Sysname> system-view
[Sysname] interface mp-group 2/0/0
[Sysname-MP-group2/0/0] ppp mp lfi delay-per-frag 20
Related commands
ppp mp lfi enable
ppp mp lfi size-per-frag
ppp mp lfi enable
Use ppp mp lfi enable to enable LFI on an interface.
Use undo ppp mp lfi to disable LFI on an interface.
Syntax
ppp mp lfi enable
undo ppp mp lfi enable
Default
LFI is disabled on an interface.
51