Measuring To A Reference Line/Arc; Measuring The Points - Leica TPS1200 series Technical Reference Manual

Reference Line
42.5
42.5.1
Description
Access
Measure to line - hori-
zontal measurements

Measuring to a Reference Line/Arc

Measuring the Points

The horizontal and vertical position of a measured point can be calculated relative to the
defined reference line/arc.
Select <Task: Measure to XX> in REFLINE Choose Task & Reference Line, Refer-
ence page and press CONT (F1) to access REFLINE Measure Points. Refer to "42.4
Starting Reference Line" to access REFLINE Choose Task & Reference Line.
OR
Press SURVY (F5) in REFLINE XX Stakeout to access REFLINE Measure Points.
Refer to "42.6 Staking to a Reference Line/Arc" to access REFLINE XX Stakeout.
d2
P0
P1
TPS12_179
TPS1200
P2
d3
P1 Start point
d5
P2 End point
P4
P3 Measured point
d1
P4 Reference point
P3
d1
d4
d2
d3
d4
d5
∆
< Offset:>
∆
< Line:>
∆
< Line-End:>
<Check Dist 1:>
<Check Dist 2:>
984