Voice Vlan Mode Auto - H3C MSR Series Command Reference Manual

Default
The system is configured with the default OUI addresses. You can remove the default OUI
addresses, and then add recognizable OUI addresses manually.
Table 10 Default OUI addresses
Number
1
2
3
4
5
6
7
Views
System view
Default command level
2: System level
Parameters
mac-address: Specifies a source MAC address of voice traffic in the format of H-H-H. For example,
1234-1234-1234.
mask oui-mask: Specifies the valid length of the OUI address by a mask in the format of H-H-H,
formed by consecutive 1s and 0s. For example, FFFF-0000-0000. To filter the voice device of a
specific vendor, set the mask to FFFF-FF00-0000.
description text: Specifies a string of 1 to 30 case-sensitive characters that describes the OUI
address.
oui: Specifies the OUI address you want to remove in the format of H-H-H. For example,
1234-1200-0000. An OUI address is the logic AND result of mac-address and oui-mask. An OUI
address cannot be a broadcast address, a multicast address, or an all-zero address.
Usage guidelines
The system supports up to 16 OUI addresses.
Examples
# Add a recognizable OUI address 1234-1200-0000 by specifying the MAC address as
1234-1234-1234 and the mask as fff-ff00-0000, and configure its description string as PhoneA.
<Sysname> system-view
[Sysname] voice vlan mac-address 1234-1234-1234 mask ffff-ff00-0000 description PhoneA
Related commands
display voice vlan oui

voice vlan mode auto

Use voice vlan mode auto to configure the port to operate in automatic voice VLAN assignment
mode.
OUI address
0001-E300-0000
0003-6B00-0000
0004-0D00-0000
00D0-1E00-0000
0060-B900-0000
00E0-7500-0000
00E0-BB00-0000
44
Vendor
Siemens phone
Cisco phone
Avaya phone
Pingtel phone
Philips/NEC phone
Polycom phone
3Com phone