Table of Contents
Advertisement
Modem management configuration commands
modem
Syntax
modem [ both | call-in | call-out ]
undo modem [ both | call-in | call-out ]
View
User interface view
Default level
2: System level
Parameters
both: Enables both modem call-in and modem call-out.
call-in: Enables only modem call-in.
call-out: Enables only modem call-out.
Description
Use the modem command to enable modem call-in, modem call-out, or both on the user interface.
Use the undo modem command to disable modem call-in, modem call-out, or both.
By default, both modem call-in and modem call-out are disabled.
NOTE:
The modem command applies to only auxiliary (AUX) ports.
Examples
# Enable modem call-in on port AUX 0.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] modem call-in
modem auto-answer
Syntax
modem auto-answer
undo modem auto-answer
View
User interface view
Default level
2: System level
95
Advertisement
Table of Contents
