Tunnel Statistics Vxlan Auto - H3C CR16000-F Command Reference Manual

Default
The packet statistics feature is disabled for the VXLAN tunnels associated with a VSI.
Views
VSI view
Predefined user roles
network-admin
Usage guidelines
This command enables packet statistics only for VXLAN tunnels. It does not take effect on
VXLAN-DCI tunnels.
When the packet statistics feature is enabled for VXLAN tunnels, use the display vxlan tunnel
vxlan-id vxlan-id tunnel tunnel-number command to view packet statistics of VXLAN
tunnels. The VXLAN tunnel packet statistics output from the display interface tunnel
command are inaccurate.
Examples
# Enable packet statistics for all VXLAN tunnels associated with VSI vpna.
<Sysname> system-view
[Sysname] vsi vpna
[Sysname-vsi-vpna] tunnel statistics enable
Related commands
display interface tunnel (Layer 3—IP Services Command Reference)
display vxlan tunnel

tunnel statistics vxlan auto

Use tunnel statistics vxlan auto to enable packet statistics for automatically created
VXLAN tunnels.
Use undo tunnel statistics vxlan auto to disable packet statistics for automatically
created VXLAN tunnels.
Syntax
tunnel statistics vxlan auto
undo tunnel statistics vxlan auto
Default
The packet statistics feature is disabled for automatically created VXLAN tunnels.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command enables the device to collect packet statistics for all VXLAN tunnels that are
automatically created by EVPN. This command takes effect on both existing VXLAN tunnels and
VXLAN tunnels created after execution of this command.
28