Bpdu Tunnel Configuration Commands; Bpdu-Tunnel - H3C s3600 series Command Manual

3

BPDU Tunnel Configuration Commands

Two features, the BPDU Tunnel support for packets of multiple protocols and adjusting tunnel packet
MAC addresses, are newly added. For details, refer to
BPDU Tunnel Configuration Commands

bpdu-tunnel

Syntax
bpdu-tunnel protocol-type
undo bpdu-tunnel { protocol-type | all }
View
Ethernet port view
Parameters
protocol-type: Protocol type, packets of which will be transmitted through a BPDU tunnel, This
argument can be a keyword listed in
Table 3-1 Description on the protocol-name argument
Value
cdp
hgmp
lacp
pagp
pvst
stp
vtp
udld
all: Disables BPDU tunnel for all protocol packets.
Table 3-1.
Enable/Disable BPDU tunnel for CISCO discovery protocol (CDP).
Enable/Disable BPDU tunnel for Huawei group management protocol
(HGMP) related protocols, including neighbor discovery protocol (NDP),
neighbor topology discovery protocol, cluster member remote control
(MRC), and Huawei authentication bypass protocol (HABP).
Enable/Disable BPDU tunnel for link aggregation control protocol (LACP).
Enable/Disable BPDU tunnel for port aggregation protocol (PAGP).
Enable/Disable BPDU tunnel for per-VLAN spanning tree (PVST).
Enable/Disable BPDU tunnel for spanning tree protocol (STP).
Enable/Disable BPDU tunnel for VLAN trunk protocol (VTP).
Enable/Disable BPDU tunnel for uni-directional link direction (UDLD).
3-1
bpdu-tunnel and bpdu-tunnel
Description
tunnel-dmac.