Command Manual – VLAN-VPN
H3C S3100-52P Ethernet Switch
Chapter 3 BPDU Tunnel Configuration Commands
Note:
Two features, the BPDU Tunnel support for packets of multiple protocols and adjusting
tunnel packet MAC addresses, are newly added. For details, refer to
bpdu-tunnel
3.1 BPDU Tunnel Configuration Commands
3.1.1 bpdu-tunnel
Syntax
bpdu-tunnel protocol-type
undo bpdu-tunnel { protocol-type | all }
View
Ethernet port view
Parameters
protocol-type: Protocol type, packets of which will be transmitted through a BPDU
tunnel, This argument can be a keyword listed in
Table 3-1 Description on the protocol-name argument
Value
cdp
hgmp
lacp
pagp
tunnel-dmac.
Enable/Disable BPDU tunnel for CISCO discovery protocol
(CDP).
Enable/Disable BPDU tunnel for Huawei group management
protocol (HGMP) related protocols, including neighbor
discovery protocol (NDP), neighbor topology discovery
protocol, cluster member remote control (MRC), and Huawei
authentication bypass protocol (HABP).
Enable/Disable BPDU tunnel for link aggregation control
protocol (LACP).
Enable/Disable BPDU tunnel for port aggregation protocol
(PAGP).
Chapter 3 BPDU Tunnel Configuration Commands
Table
3-1.
Description
3-1
bpdu-tunnel
and