Display Udp Statistics - H3C S3100-52P Command Manual

Command Manual – IP Address and Performance Configuration
H3C S3100-52P Ethernet Switch
Parameter
None
Description
Use the display tcp status command to view the state of all the TCP connections so
that you can monitor TCP connections in real time.
Example
# View the state of all the TCP connections.
<H3C> display tcp status
*: TCP MD5 Connection
TCPCB
03e37dc4
04217174
Table 2-6 Description on the fields of the display tcp status command
*
TCPCB
Local Add:port
Foreign Add:port
State

2.1.12 display udp statistics

Syntax
display udp statistics
View
Any view
Parameter
None
Description
Use the display udp statistics command to view the statistics about UDP packets.
Related command: reset udp statistics.
Local Add:port
0.0.0.0:4001
100.0.0.204:23
Field
If there is an asterisk before a connection, it means that the
TCP connection is authenticated through the MD5 algorithm
Address of the TCP control block
Local IP address; port number
Remote IP address; port number
TCP connection state
Chapter 2 IP Performance Configuration
Foreign Add:port
0.0.0.0:0
100.0.0.253:65508
Description
2-14
Commands
State
Listening
Established