Display Udp Statistics - H3C S3100 Series Command Manual

Description
Use the display tcp status command to display the state of all the TCP connections so that you can
monitor TCP connections in real time.
Examples
# Display the state of all the TCP connections.
<Sysname> display tcp status
*: TCP MD5 Connection
TCPCB Local Add:port
03e37dc4 0.0.0.0:4001
04217174 100.0.0.204:23
Table 2-6 Description on the fields of the display tcp status command
Field
*
TCPCB
Local Add:port
Foreign Add:port
State

display udp statistics

Syntax
display udp statistics
View
Any view
Parameters
None
Description
Use the display udp statistics command to display the statistics about UDP packets.
Related commands: reset udp statistics.
Examples
# Display the statistics about UDP packets.
<Sysname> display udp statistics
Received packets:
Total: 26320
checksum error: 0
shorter than header: 0, data length larger than packet: 0
no socket on port: 0
Foreign Add:port
0.0.0.0:0
100.0.0.253:65508
If there is an asterisk before a connection, it means that the TCP
connection is authenticated through the MD5 algorithm.
TCP control block
Local IP address and port number
Remote IP address and port number
State of the TCP connection
2-12
State
Listening
Established
Description