Ipv6 Nd Router-Preference - Allied Telesis IE220 Series Manual

IP 6 C
V OMMANDS
6 -
IPV ND ROUTER PREFERENCE

ipv6 nd router-preference

Overview Use this command to set the default router preference in the router
advertisements sent on a particular interface. You can use this setting to decide
whether devices will use this router instead of an alternative router, by giving this
router and the alternative router different values.
Use the no variant of this command to return the router preference to its default
value.
ipv6 nd router-preference {low|medium|high}
Syntax
no ipv6 nd router-preference
Default Medium
Mode Interface Configuration for a VLAN interface or a local loopback interface.
Example To set the router preference to high on vlan2, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ipv6 nd suppress-ra
commands
show ipv6 interface
Command Version 5.5.1-0.1: command added
changes
C613-50644-01 Rev B
Parameter Description
low
(0b11)
Preference for this router on this interface is low.
medium
(0b00)
Preference for this router on this interface is medium.
high
(0b01)
Preference for this router on this interface is high.
configure terminal
interface vlan2
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
ipv6 nd router-preference high
926