Router Ipv6 Rip - Allied Telesis IE340 Series Command Reference Manual

RIP IP 6 C
NG FOR V OMMANDS
6
ROUTER IPV RIP

router ipv6 rip

Overview Use this global command to enter Router Configuration mode to enable a RIPng
routing process.
Use the no variant of this command to disable the RIPng routing process.
Syntax router ipv6 rip
no router ipv6 rip
Mode Global Configuration
Example To enable a RIPng routing process, use the following commands:
awplus#
awplus(config)#
awplus(config-router)#
C613-50631-01 Rev A
configure terminal
router ipv6 rip
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
1093