JunosE 11.3.x Command Reference Guide A to M
l2tp tunnel short-drain-timeout
Syntax
Release Information
Description
Options
Mode
1188
l2tp tunnel short-drain-timeout [ timeOutValue ]
no l2tp tunnel short-drain-timeout
Command introduced in JunosE Release 7.1.0.
Configures the amount of time a disconnected LAC L2TP tunnel waits (the drain timeout)
before restarting after a restart request is received. The no version restores the default
setting.
timeOutValue—Short drain timeout in seconds, in the range 0–31; default value is 2
seconds
Global Configuration
Copyright © 2010, Juniper Networks, Inc.