Front Axle Installation - New Holland T8010 Manual

Hide thumbs Also See for T8010:

Table of Contents

Properly support the front axle and carefully move

under the tractor. Raise the front axle into position.

Lubricate the pivot pin with grease. Install the front

and rear pivot arm shims and the pivot pin.

Section 25 - Four-Wheel Drive Front Axle - Chapter 7

FRONT AXLE INSTALLATION

Properly support the rear pivot bushing bracket to

align the holes in the side plates. Install the side plate

bolts on both sides of the front axle. Tighten the bolts

to a torque of 735 to 945 Nm (542 to 627 lb. ft.).

Install the front pivot pin bolt (1). Tighten the bolt to a

torque of 111 to 198 Nm (82 to 146 lb. ft.).

Table of Contents

T8020 T8030 T8040