New Holland T8010 Manual page 49

Hide thumbs Also See for T8010:

Table of Contents

Install the deaeration tank to coolant recovery bottle

hose (1) and engine air bleed line (2).

Install the air cleaner assembly onto the bracket and

tighten the mounting nuts. Make sure the alternator

wire harness is installed between the air cleaner and

mounting brackets.

Tighten the air cleaner to turbo hose clamp

Section 10 - Engine - Chapter 1

Install the air cleaner restriction switch connector.

Connect the alternator harness.

Install new O-rings and tighten the A / C compressor

Chapters

Table of Contents

T8020 T8030 T8040