New Holland T8010 Manual page 570

STEP 76
Lubricate the inner diameter of the outer planetary
hub bearing cone with Case 135 H EP SAE 85W-140
Gear Lubricant. Place the planetary gear hub in a
press. Use the proper step plate adapter to install the
bearing cone on the gear hub.
STEP 77
install the planetary gear hub (1) in the planetary ring
gear (2). Install the wire retaining ring (3) in the ring
gear groove.
Section 25 - Four-Wheel Drive Front Axle - Chapter 10
RR98K104
3
2
1
RD02J037
25-10-25
STEP 78
Clean and inspect the planetary hub. Lubricate the
outer bearing cup with Case 135 H EP SAE 85W-140
Gear Lubricant. Place the hub in a press. Use a
suitable bearing cup installer to install the outer
bearing cup in the hub.
STEP 79
Turn the planetary hub over. Lubricate the inner
bearing cup with CASE 135 H EP SAE 85W-140
Gear Lubricant. Use a suitable bearing cup installer
to press the inner bearing cup into the hub.
RD02J038
RR98K125