New Holland T8010 Manual page 812

Hide thumbs Also See for T8010:

Table of Contents

Place the PTO valve on a clean workbench.

Remove the plug and PTO modulation spool.

Section 35 - Hydraulic Systems, 3PT - Chapter 3

Remove the preload spring (1) from the spool

assembly. Compress the modulation spring (2) by

pushing on the retaining sleeve (3) and separate the

modulator spool(4) from the modulator piston (5). Be

careful not to lose the two steel balls (6) when the

assembly comes apart.

Remove the PTO solenoid coil and two O-rings and

the diff lock solenoid from the valve.

Remove the solenoid cartridges from the valve and

discard the O-rings.

Chapters

Table of Contents

T8020 T8030 T8040