New Holland T8010 Manual page 248

STEP 3
Remove the hitch position sensor cover.
STEP 4
Disconnect the hitch position sensor connector.
STEP 5
1
Disconnect the draft pin connector (1 - LH and RH
side) and the transmission sump temperature sender
connector (2).
Section 21 - Transmission, Drivelines - Chapter 5
RD02C182
RD02C183
2
RD02C184
21-5-5
STEP 6
Disconnect the wire harness from the PTO (1) and
MFD (2) solenoids.
STEP 7
2
Remove the two lines (1) from the trailer brake valve
(if equipped). Remove the two lines (2) from the
steering priority valve.
RD02C185
1
1
RD02C186