Template Name: OML_2_col
Template Date: 2001_03_06
STEP 1
Park the tractor on a hard, level surface. Put the
transmission shift lever in PARK. Turn off the engine
and remove the key. Place blocks in front of and
behind the rear wheels.
STEP 2
Remove the left (shown) and right side panels.
STEP 3
If required, evacuate the A/C system. See A/C
Section in this Repair Manual.
Rac 0-00000
Section 10 - Engine - Chapter 4
COOLING MODULE REMOVAL
RD02C070
RD05N011
RD05N012
10-4-3
NOTE: If A/C condenser DOES NOT have to be
removed, DO NOT evacuate the system.
STEP 4
Drain the engine coolant into a suitable clean
container. Radiator drain is located on the right side
of the front frame.
WARNING: Check and service cooling
s y s t e m a c c o r d i n g t o m a i n t e n a n c e
instructions. Hot coolant can spray out if the
deaeration tank cap is removed while system
!
is hot. To remove the deaeration tank cap, let
system cool, turn to the first notch, then wait
until all the pressure is released. Scalding
can result from the fast removal of the
deaeration tank cap.
2
Remove the air scoop / hose bracket (1) mounting
bolt (2) and mounting nut (3). Remove the bracket.
Remove the hose clamps (4).
NOTE: In the following steps, the hood has been
removed for photographic purposes.
RD05N013
M855
3
1
4
RD05N014