Assembly Of The Master Clutch - New Holland T8010 Manual

Hide thumbs Also See for T8010:

Table of Contents

Assembly of the Master Clutch

Install the clutch piston into the clutch carrier.

Carefully push the clutch piston down over the

lubricated seals.

Install the 16 springs.

Section 21 - Transmission, Drivelines - Chapter 6

Install the spring retainer plate. Be sure the spring

locators in the plate engage each spring.

Use a bridge and hydraulic press to compress the

springs. Install the snap ring in the groove in the

clutch carrier.

NOTE: The assembly of the master clutch is

continued after the master clutch is installed onto the

range input shaft.

Table of Contents

T8020 T8030 T8040