New Holland T8010 Manual page 733

Hide thumbs Also See for T8010:

Table of Contents

Install the three brake adjuster assemblies into the

differential carrier. The Belleville washer ends go into

the differential carrier.

Install plates as follows:

1. Install a separator plate on to the locating pins

and against the differential plate carrier.

2. Install a friction plate against the separator plate.

3. Install three more separator and friction plates. A

friction plate must be the last part installed.

Section 33 - Brakes - Chapter 2

Install the adjuster return plate on the locating pins.

The tabs on the plate must contact the adjuster

dowel assemblies.

Install the brake cover onto the locating dowels.

Install the brake cover retaining bolts. Tighten the

bolts to a torque of 177 to 197 Nm (130 to 145 lb. ft.)

Chapters

Table of Contents

T8020 T8030 T8040