New Holland T8010 Manual page 266

Hide thumbs Also See for T8010:

Table of Contents

Check seals and replace if necessary as follows:

1. Inspect the seals (see arrows) on the master

clutch carrier.

2. If necessary, remove both the seals and the O-rings

beneath them.

3. Replace the O-rings and seals.

4. Lightly lubricate with petroleum jelly.

Section 21 - Transmission, Drivelines - Chapter 6

Check the clutch springs with a spring compression

The springs must have the following specifications:

Free Length ........................ 35.82 mm (1.410 inches)

Compressed to 23.12 mm

(0.910 inch) .................................. 111.25 N (25 lb.)

NOTE: Do not compress these springs beyond

23.12 mm (0.910 inch).

Chapters

Table of Contents

T8020 T8030 T8040