STEP 1
Drain the rear axle as follows:
1. Put a container under the transmission housing.
2. Remove the drain plug and drain the fluid from
the transmission housing.
3. Remove the drain plug from under the axle
housings and remove the fluid.
NOTE: The transmission holds approximately 174
liters (46 gallons) of oil.
Section 27 - Rear Axle - Chapter 1
REAR AXLE REMOVAL
STEP 2
91S16
Move the rear housing handler CAS17-527 into
position under the tractor.
STEP 3
91S10
Raise the front lift of the rear housing handler. Turn
the rear threaded rods until the rear frame is
supported.
27-1-6
13S23
13S29