STEP 93
Tighten the plate bolts to a torque of 58 to 64 Nm (43
to 47 lb. ft.).
STEP 94
O
J
The following parts are assembled at locations "J",
"N" and "O".
STEP 95
Move the lower swing arm assembly into position.
Section 25 - Four-Wheel Drive Front Axle - Chapter 11
RD02M089
N
RD02M104
RD02M090
25-11-21
STEP 96
Install the lower swing arm pins.
STEP 97
Install the dowel pin. Drive the pion in until seated.
STEP 98
Install the thrust washer.
RD02M091
RD02M093
RD02M949