STEP 75
Put petroleum jelly on the teflon rings.
STEP 76
Install the clutch piston into the carrier. The flat side
of the piston must face down. Push the piston into the
carrier by hand.
STEP 77
Repeat above Steps for the medium range clutch
plate carrier.
Section 21 - Transmission, Drivelines - Chapter 6
T95280
41S3
A10873
21-6-24
STEP 78
Install a separator plate.
STEP 79
Install a new friction plate.
NOTE: Dip all friction plates in clean transmission
fluid.
STEP 80
Install a separator plate. Install the remaining 10
friction plates and 9 separator plates, alternating the
plates.
A10875
A10876
A10877