New Holland T8010 Manual page 38

Template Name: OML_2_col
Template Date: 2001_03_06
NOTE: Make note of where any wire harness and
hose tie straps are removed during disassembly so
they can be properly installed during assembly.
STEP 1
Park the tractor on a hard, level surface. Put the
transmission shift lever in PARK. Turn off the engine
and remove the key. Place blocks in front of and
behind the rear wheels.
STEP 2
Remove the battery cover. Disconnect the negative
cable (-) then the positive cable (+).
STEP 3
Remove the hood. See Hood Removal Section in this
Repair Manual.
STEP 4
Evacuate the A/C system. See A/C Service Section
in this Repair Manual.
Rac 0-00000
Section 10 - Engine - Chapter 1
ENGINE REMOVAL
STEP 5
Remove the cooling module. See Cooling Module
Section in this Repair Manual.
STEP 6
RD02C070
Remove the exhaust shield mounting hardware (1)
and remove the shield (2).
STEP 7
R e m ove t h e a i r c l e a n e r a s p i r a t o r h o s e ( 1 ) .
Disconnect the exhaust pipe at the turbo. (2).
RD02E069
10-1-3
2
1
1
RD05N100
2
RD05N101