New Holland T8010 Manual page 273

Hide thumbs Also See for T8010:

Table of Contents

Remove 8 piston return Belleville springs.

Remove the lube management ring.

Remove the final Belleville spring.

NOTE: Mark the orientation of the Belleville springs

and lube management ring for proper reinstallation.

Section 21 - Transmission, Drivelines - Chapter 6

Use a puller to remove the rear bearing cone.

Remove the snap ring and remove the high range

clutch pack assembly from the shaft.

Remove the snap ring from the clutch pack assembly.

Chapters

Table of Contents

T8020 T8030 T8040