New Holland T8010 Manual page 25

TORQUE SPECIFICATIONS - METRIC HARDWARE
Use the following torques when specifications are not given.
These values apply to fasteners with coarse threads as received from supplier, plated or unplated, or when lubricated with engine oil.
These values do not apply if graphite or Molydisulfide grease or oil is used.
Grade 8.8 Bolts, Nuts, and Studs
Pound-
Size Inches
M4 24 to 36
M5 60 to 72
M6 96 to 108
M8 228 to 276
M10 456 to 540
Pound-
Size
M12 66 to 79
M14 106 to 127
M16 160 to 200
M20 320 to 380
M24 500 to 600
M30 920 to 1100
M36 1600 to 1950
Section 00 - General Information - Chapter 1
8.8
Newton
metres
3 to 4
7 to 8
11 to 12
26 to 31
52 to 61
Newton
Feet metres
90 to 107
144 to 172
217 to 271
434 to 515
675 to 815
1250 to 1500
2175 to 2600
Grade 10.9 Bolts, Nuts, and Studs
Size
M4
M5
M6
M8
Size
M10
M12
M14
M16
M20
M24
M30
M36
Grade 12.9 Bolts, Nuts, and Studs
Usually the torque values specified for grade 10.9 fasteners
can be used satisfactorily on grade 12.9 fasteners.
00-1-4
10.9
Pound- Newton
Inches metres
36 to 48 4 to 5
84 to 96 9 to 11
132 to 156 15 to 18
324 to 384 37 to 43
Pound- Newton
Feet metres
54 to 64 73 to 87
93 to 112 125 to 150
149 to 179 200 to 245
230 to 280 310 to 380
450 to 540 610 to 730
780 to 940 1050 to 1275
1470 to 1770 2000 to 2400
2580 to 3090 3500 to 4200
12.9