New Holland T8010 Manual page 272

STEP 58
Remove the thrust washer spacer ring.
STEP 59
Remove the high range drive gear.
STEP 60
Remove the caged needle bearing.
Section 21 - Transmission, Drivelines - Chapter 6
T85722
T95723
T85724
21-6-19
STEP 61
Remove the two bearing thrust washers and the
needle thrust bearing.
STEP 62
Remove the piston retur n Belleville springs as
follows:
1. Install a compression sleeve with the notch
CAS1903-3 over the piston return Belleville
springs for removing the snap ring.
2. Position the opening in the compression sleeve
over the ends of the snap ring.
3. Compress the Belleville springs with a press.
4. Remove the snap ring.
A10908
A10884