New Holland T8010 Manual page 207

Hide thumbs Also See for T8010:

Table of Contents

Install the compression sleeve CAS1903-3 with the

notch over the piston return Belleville washers. The

opening in the sleeve must be over the ends of the

snap ring. Compress the Belleville washers with a

hydraulic press and remove the snap ring.

Remove one piston return Belleville washer.

Remove the lube management ring.

Section 21 - Transmission, Drivelines - Chapter 4

Remove eight Belleville washers.

Remove the snap ring.

Remove the two bearing thrust washers and the

needle thrust bearing.

Chapters

Table of Contents

T8020 T8030 T8040