New Holland T8010 Manual page 954

Hide thumbs Also See for T8010:

Table of Contents

Remove the boot support washer (1). Remove the

steering column boot (2) along with the boot support

plate and wire stiffener.

Tag and remove the four hydraulic hoses (1) and the

steering sensing line (2) from the steering hand

pump. Cap the lines and open fittings. If your tractor

is equipped with quick disconnect fittings, use special

tool 380000795 to disconnect the lines.

Section 41 - Steering - Chapter 1

Remove the four steering column lock nuts and

washers at the column base. Support the steering

column in the cab while an assistant removes the

steering hand pump from the cab firewall. Remove

the steering column.

Chapters

Table of Contents

T8020 T8030 T8040