New Holland T8010 Manual page 967

Hide thumbs Also See for T8010:

Table of Contents

Make sure that the wheel/rim is positioned so that the

straightedge is parallel to the floor when mounted on

the spacer tubes.

Locate two points about 500 mm (20 in.) apart on the

machine frame milled surface. Mark these points "A"

M e a s u r e a n d r e c o r d t h e d i s t a n c e f r o m t h e

straightedge to point "A".

Section 41 - Steering - Chapter 2

Chapters

Table of Contents

T8020 T8030 T8040