Disassembly
ATTENTION: Take time to familiarize yourself with
potential pinch and crush points on this axle before
service work is started.
IMPORTANT: Before beginning disassembly, the
axle housing must be secured to prevent rollover and
falls that could cause damage or injury.
IMPORTANT: Carelessness and inattention on the
par t of the technicians or others working on or
around this axle can create an increased risk of
injury.
STEP 1
Disassembly of the following parts is from location
"B".
STEP 2
Remove the angle sensor linkage from the sensor.
Section 25 - Four-Wheel Drive Front Axle - Chapter 11
SUSPENSION FWD AXLE
B
RD02M104
RD02M001
STEP 3
Remove the angle sensor linkage from the axle.
STEP 4
Remove the angle sensor from the axle.
STEP 5
Remove the arm from the sensor.
25-11-3
RD02M002
RD02M003
RD02M005