New Holland T8010 Manual page 47

STEP 50
Connect the engine wire harness connector.
STEP 51
Install the support mounting bolts and tighten to a
torque of 310 to 380 Nm (230 to 280 lb. ft.).
STEP 52
Install the fuel supply hose.
Section 10 - Engine - Chapter 1
STEP 53
RD05N126
If removed, install the windshield step (1) and tighten
the bolts (2).
STEP 54
RD05N125
Install and tighten the right rear support bolt.
STEP 55
RD05N124
Ins tall the r i ght ( 1) and left (2) b rake switc h
connectors.
10-1-12
1
2
1
2
RD05N123
RD05N122
RD05N120