STEP 76
Install the washer and nut. Torque cab mounting nut
to 190 to 244 Nm (140 to 180 lb. ft.)
STEP 77
Install the wheel and tire assemblies on the rear
axles.
Section 27 - Rear Axle - Chapter 1
STEP 78
Remove the rear housing handler from the tractor.
STEP 79
Fill the transmission with fluid. See the Operator's
Manual for the correct fluid type. Run the tractor and
check the fluid level. Add as necessary.
RD02F026
86S1
27-1-28