Front Axle Differential Oil Level; Front Wheel Hub Oil Level (4Wd) - New Holland Workmaster 50 Operator's Manual

2. If necessary, remove the dipstick adapter fitting (2) and
add oil through dipstick hole (3). Add oil until level is to
upper mark on the dipstick. Do not overfill.
NOTICE: Use only Genuine NEW HOLLAND AMBRA MULTI G 134™ HYDRAULIC TRANSMISSION OIL hydraulic
oil.

Front axle differential oil level

1. On Four-Wheel Drive (4WD) tractors, check oil level at
oil fill plug (1). The oil is at the correct level when oil
level is at the bottom of the fill port opening.
2. If oil level is low, add NEW HOLLAND AMBRA MULTI
G 134™ HYDRAULIC TRANSMISSION OIL hydraulic
oil through fill port, until correct oil level is obtained.

Front wheel hub oil level (4WD)

1. On Four-Wheel Drive (4WD) tractors, check each front
axle hub oil level with the wheel positioned so the oil
filler plug (1) is level with the center of the hub, midway
from top to bottom.
2. The oil is at the correct level when the oil level is at the
bottom of the fill port opening.
7 - MAINTENANCE
7-18
2
86096197N
1
96096503
1
76073647N