New Holland T8010 Manual page 143

FRONT FRAME TO SPEED TRANSMISSION SPLIT
Disassembly
STEP 1
Prepare for disassembly as follows:
1. Park the tractor on a hard level surface.
2. Put the transmission control lever in PARK.
3. Fully lower the three point hitch.
4. Stop the engine and remove the key.
5. Put blocks behind and in front of the rear wheels.
6. Remove the front weights and weight bracket.
7. Evacuate the A/C system. See A/C Section in
this Service Manual.
8. See the FWD drive shaft removal information
and remove the FWD drive shaft.
9. Drain the engine cooling system into a clean
container.
NOTE: Cooling capacity is approximately 24.7 liters
(6.5 gallons).
Section 21 - Transmission, Drivelines - Chapter 2
96RS28A
21-2-4
STEP 2
1
Disconnect the negative (1) and positive (2) battery
cables.
STEP 3
Disconnect the battery cables at the starter.
STEP 4
1
Tag and remove the supply (1) and return (2) heater
hoses.
2
RD02E069
RD05N104
2
RD05N105