New Holland T8010 Manual page 959

Hide thumbs Also See for T8010:

Table of Contents

C o n n e c t t h e t w o s t e e r i n g c o l u m n e l e c t r i c a l

connectors (1). Install the cable clip with pin (2) for

the steering column tilt mechanism cable. Install the

cable into the anchor bracket and tighten the lock

Install the upper control housing and tighten the

retaining screw.

Section 41 - Steering - Chapter 1

Use the steering wheel position mark made during

disassembly, and the steering column shaft centering

mark made during assembly, install the steering

wheel. Install the steering wheel retaining nut and flat

washer. Tighten the nut to a torque of 45 to 54 Nm

(33 to 40 lb. ft.). Install the horn button.

Use a Torx screwdriver to install the upper and lower

steering column covers.

Chapters

Table of Contents

T8020 T8030 T8040