New Holland T8010 Manual page 478

Hide thumbs Also See for T8010:

Table of Contents

Installation

Install the thrust washers as shown.

Properly support the axle, move under the tractor

and lift into place. Once in place, install a jack under

the center of the axle and level.

Section 25 - Four-Wheel Drive Front Axle - Chapter 6

Making sure the axle pivot pin bore and thrust

washers are aligned with the frame bore, install the

pivot pin (1).Be sure not to damage the pivot pin bore

Install the pivot pin locking plate and bolts. Torque

bolts to 59 to 105 Nm (44 to 78 lb. ft.).

Chapters

Table of Contents

T8020 T8030 T8040