STEP 20
Use a puller to remove the bearing from the axle
shaft.
STEP 21
Remove and discard the O-ring used on 4-in. axles
from the axle bushing.
STEP 22
Use a puller to remove the bushing from the axle
shaft.
NOTE: Remove the O-ring from the inside diameter
of the bushing on 115 mm (4.5 in.) diameter axle.
Section 27 - Rear Axle - Chapter 1
STEP 23
T97986
Use a puller to remove the inner bearing cup from the
axle housing.
STEP 24
T97988
Use a puller to remove the outer bearing cup from
the axle housing.
T97991
27-1-10
T97994
T97997