New Holland T8010 Manual page 872

Hide thumbs Also See for T8010:

Table of Contents

Remove the steering line orifice fitting and discard

the O-ring (1). Remove the priority valve spring and

spool. Inspect the spring and spool for damage or

NOTE: Measure the distance from the adjustment

end of the pilot relief valve assembly to the body of

the valve before removing the lock nut.

Remove the pilot relief valve lock nut.

Section 35 - Hydraulic Systems, 3PT - Chapter 6

Remove the pilot relief valve assembly.

Remove and discard the O-rings (1) and the backup

ring (2) from the pilot relief valve orifice fitting.

Unscrew the pilot relief valve adjuster from the orifice

fitting and discard the O-ring (1). Remove the spring

and the needle valve from the orifice fitting. Inspect

for damage or wear.

Chapters

Table of Contents

T8020 T8030 T8040