Load Check Inspection - New Holland T8010 Manual

Remote Valve Load Check Valves
The remote hydraulic valve is equipped with a single
load check on all five remote sections on the "B"
(extend) port. The load check is used in applications
w h e r e a r e m o t e hy d r a u l i c c y l i n d e r m u s t b e
hydraulically locked in position with a minimal amount
of leak down.
2
1. LOAD CHECK
2. LOAD CHECK PLUNGER
Section 35 - Hydraulic Systems, 3PT - Chapter 5

LOAD CHECK INSPECTION

1
- Lower suspended/ raised implements.
- Clean the load check area.
- Slowly loosen the load check and relieve any
trapped pressure.
- Use a needle nose pliers to retrieve the plunger.
- Inspect seals and check for damage. (See Remote
Valve Service Manual Section).
35-5-33
1
RI06A064