New Holland T8010 Manual page 728

Brake Cylinder Mounting Bolts ............................................................................... 177 to 179 Nm (130 to 145 lb. ft.)
Friction Disc Minimum Thickness ..............................................................................................3.45 mm (0.136 inch)
Disassembly
STEP 1
Remove the rear axles and planetarium from the rear
frame. See Rear Axle and Planetaries Section in this
Service Manual for axle removal.
STEP 2
1
Remove the brake tube (1) and diff lock tube (2) from
the rear frame housing.
Section 33 - Brakes - Chapter 2
SPECIAL TORQUES
SPECIFICATIONS
BRAKE CYLINDERS
STEP 3
Lift the supply tubes out of the brake cover. If the
supply tubes are to be removed from the rear frame,
remove the lower O-rings from the tube first.
RD02D050
STEP 4
2
Remove two brake cover mounting bolts and install
aligning dowels.
RD02D051
33-2-3
87-35
T97946