New Holland T8010 Manual page 356

STEP 9
While supporting the vertical lifting link, drive out the
hitch swivel pin with a suitable tool. Repeat Steps 9
through 11 for the other vertical lifting link.
NOTE: Be prepared for the sudden drop in the
vertical lifting link as the pin is driven out.
STEP 10
Remove the hydraulic lines to the hitch lift cylinder as
follows:
1. Be prepared to catch hydraulic fluid as the
hydraulic system is opened.
2. Remove the hydraulic line from the top of the
hitch lift cylinder and then from the bottom of the
hitch lift cylinder (both sides).
Section 21 - Transmission, Drivelines - Chapter 8
26s27b
27s12b
21-8-5
STEP 11
Remove the bolt and locking flag plate in the upper
end of the hitch lift cylinder (both sides).
STEP 12
Secure the rockshaft assembly as follows:
1. Attach a chain hoist to the top of the rockshaft
assembly.
2. Place enough tension on the chains to support
the assembly without adding a lifting force.
76-6a
35-24