4. Instrument Cluster
Display
5. Temperature Control
Section 50 - Climate Control - Chapter 1
Displays temperature setpoint
and system status
Selects temperature setpoint,
the controlling parameter for
the system
4
M
G
I
G. Digital Temperature Display: Displays current setpoint selected by
the operator for desired cab temperature.
On start-up flashes "88" for short time to indicate that the controller
is initializing.
When system fault occurs, display toggles between temperature
display and fault code number.
H. Displays °F or °C for Fahrenheit or Celsius. To change the display to
°F or °C, press and hold the key pad AUTO key for three seconds
after the screen has been turned on.
I. Icon displays when system is operating in Defog/Defrost mode.
J. Auto/Manual Switch Status
K. Blower Control Status
L. Blower Control Level
M. ATC Temperature Range: 60° F to 90° F (15.5° C to 32° C)
N. Maximum Cooling Zone: 60° F (15.5° C)
O. Maximum Heating Zone: 90° F (32° C)
50-1-14
N
H
L
RD05J048