Disassembly - New Holland T8010 Manual

Hide thumbs Also See for T8010:

Table of Contents

Disassembly

Remove the four plugs from the priority and regulator

valve and discard the O-rings.

Unscrew the PFC pump signal orifice and screen

Remove the plug. Inspect the screen and clean as

Section 35 - Hydraulic Systems, 3PT - Chapter 6

Unscrew the logic check valve plug.

Remove the logic check valve plug and discard the

O-ring and backup ring. Inspect the spring and valve

for damage or wear.

Table of Contents

T8020 T8030 T8040