New Holland T8010 Manual page 343

Valve Installation
STEP 11
1
3
Install the range transmission control valve as
follows:
1. Install a new gasket and the valve.
2. Tighten the M8 socket head mounting bolt (3) to
a torque of 27 to 32 Nm (20 to 24 lb. ft.).
3. Connect the wire harness to the solenoids (2).
4. Connect the regulated supply tube (1).
STEP 12
2
Install the odd-even transmission control valve as
follows:
1. Install a new gasket and the valve.
2. Tighten the M8 socket head mounting bolts (4) to
a torque of 27 to 32 Nm (20 to 24 lb. ft.).
3. Connect the wire harness to the solenoids (2).
4. Connect the regulated pressure tube (2).
Connect the park lock and if equipped, the FWD
tubes (1).
Section 21 - Transmission, Drivelines - Chapter 7
2
RD02E274
3
1
4
RD02E275
21-7-14
STEP 13
1
Install the speed transmission valve as follows:
1. Install a new gasket and the valve.
2. Tighten the M8 socket head mounting bolts to a
torque of 27 to 32 Nm (20 to 24 lb. ft.).
3. Connect the wiring harness to the pressure
sensor and solenoids (1).
4. Connect the supply tube (2).
2
RD02E276