New Holland T8010 Manual page 603

Hide thumbs Also See for T8010:

Table of Contents

Install the snap ring.

Apply Loctite 609 to a new seal case.

NOTE: The cradle uses 2 seals which are different

Ins tal l the seal squarely in the bore. Us e an

appropriate seal driver and seat the seal. Repeat the

procedure for the other side.

Section 25 - Four-Wheel Drive Front Axle - Chapter 11

Apply grease to the pin.

Install the pin into the housing. Align the bolt hole in

the pin with the shoulder bolt bore in the housing.

Install the shoulder bolt into the pin.

Chapters

Table of Contents

T8020 T8030 T8040